Eclipse 35 V2 - Identify Canopy Arm (V1/V2)
The Eclipse 35S V2 ONLY - Two Versions of the Canopy Arm/Strut hole Placement Position
If you need to order replacement Canopy Arms or Struts for your Eclipse 35S V2, then you will need to
measure both the Canopy Arm and the Strut (specify if it is a Long Corner Arm or Short Middle Arm needed),
we will need these measurements when you send your order through to us.
The Eclipse 35S V2 had the Canopy Arm/Strut hole position updated.
Canopy Arm/Strut V2 of the Eclipse 35S V2
Long Corner Canopy Arm V2 (part #L1)
Short Middle Canopy Arm V2 (part #L2)
Strut V2 (Corner of Canopy) (part #S1)
Strut V2 (Middle of Canopy) (part #S2)
Canopy Arm/Strut V1 of the Eclipse 35S V2
Long Corner Canopy Arm V1 (part #L1)
Short Middle Canopy Arm V1 (part #L2)
Strut V1 (Corner of Canopy) (part #S1)
Strut V1 (Middle of Canopy) (part #S2)
Related Articles
How to tell what Cantilever umbrella model I have?
How to Identify Our Cantilever Umbrellas Not sure which cantilever umbrella model you have? This guide will help you easily identify the different styles we offer. Each umbrella has unique features that set it apart from the shape of the canopy to ...
Eclipse - How to Find My Eclipse Umbrella Size
What Size is My Eclipse Umbrella Our Eclipse Umbrella has seen some updates over the years and therefore some spare parts may vary between their Versions, below is information on how to find the size of your Eclipse. If you require parts/service we ...