Eclipse V2 - Seized Tightening Knob

Eclipse V2 - Seized Tightening Knob

Seized Tightening Knob


The knob that is used to lock the umbrella in a tilt position can be turned in the "tighten" and "loosen" direction (as indicated by the arrows on the knob)


99% of cases reporting a seized knob are resolved by unlocking the knob that has been over-tightened in the loosen direction.
​
The first thing to check is:
Can the slider car be moved up and down the mast of the umbrella? If it can then this confirms that it is over-tightened in the "loosen" direction (because the slider car is not prevented from moving by the knob).
If that is the case then use maximum strength to turn in the tighten direction to unlock it (or a tool like a pipe-wrench could be used).

 



 


    • Related Articles

    • Aurora - Seized Tightening Knob

      Seized Tightening Knob The knob that is used to lock the umbrella in a tilt position can be turned in the "tighten" and "loosen" direction (as indicated by the arrows on the knob) 99% of cases reporting a seized knob are resolved by unlocking the ...

    • Aurora - Replace the Aurora Slider Car Knob

      REPLACEMENT OF THE AURORA SLIDER CAR KNOB For a copy of this manual, please print or download the Attachment. 1. This repair involves removing and replacing the Slider Car’s #19 plastic leveling Knob. In order to remove the Slider Car Knob #20, you ...

    • Eclipse V2 - Remove Seized Spigot from Main Post

      How to Remove a seized Spigot from the Ecl/Aur The first step is to fold the canopy fabric neatly removing it from in-between the arms and secure it with the strap. Visit this link on how to fold for long storage: ...

    • Eclipse V1 - Remove Seized Spigot from Main Post

      How to Remove a seized Spigot from the Ecl/Aur The first step is to fold the canopy fabric neatly removing it from in-between the arms and secure it with the strap. Visit this link on how to fold for long storage: ...

    • Eclipse V1- Changing The Wire on Eclipse V1

      Changing the wire on an Eclipse V1 For a copy of this manual, please print or download the Attachment. 1. First lay your umbrella on its side on a pair of saw horses or a table. You will need to remove the Canopy, so start off by releasing the Top ...