Eclipse V1 - Repairing Tangled Wire

Repair Tangled Wire

• Related Articles

• Eclipse V1- Changing The Wire on Eclipse V1

  Changing the wire on an Eclipse V1 For a copy of this manual, please print or download the Attachment. 1. First lay your umbrella on its side on a pair of saw horses or a table. You will need to remove the Canopy, so start off by releasing the Top ...

• Eclipse V1 - Replacing the Wire Cable

  Replacing the wire in an Eclipse V1 Umbrella This manual should be used in conjunction with the "Parts diagram and list". Step 1. Remove canopy from umbrella and store in a clean place. Lift umbrella off of spigot while pulling the "lift off pin" ...

• Eclipse V2 - Changing The Wire on Aurora/Eclipse V2

  Changing the wire on an Aurora/Eclipse V2 For a copy of this manual, please print or download the Attachment. If you are working on an Eclipse, open the canopy of the umbrella with the roof removed by pushing up and locking the Slider Car Tilt Knob ...

• Aurora - Changing The Wire on Aurora/Eclipse V2

  Changing the wire on an Aurora/Eclipse V2 For a copy of this manual, please print or download the Attachment. If you are working on an Eclipse, open the canopy of the umbrella with the roof removed by pushing up and locking the Slider Car Tilt Knob ...

• Eclipse V2 - Top Bracket Barrel Bolt Replacement

  ECLIPSE V2 BARREL BOLT REPLACEMENT AT THE TOP BRACKET #22 For a copy of this manual, please print or download the Attachment. Depending on the version of Eclipse the pivot disc will be white or black. Also check if there is a pivoting cylinder ...