Eclipse V1 - Replace the V1 Tube Holder with our New V3 Tube Holder Instructions

• Related Articles

• Eclipse V2 - Top Bracket Barrel Bolt Replacement

  ECLIPSE V2 BARREL BOLT REPLACEMENT AT THE TOP BRACKET #22 For a copy of this manual, please print or download the Attachment. Depending on the version of Eclipse the pivot disc will be white or black. Also check if there is a pivoting cylinder ...

• Eclipse V1- Changing The Wire on Eclipse V1

  Changing the wire on an Eclipse V1 For a copy of this manual, please print or download the Attachment. 1. First lay your umbrella on its side on a pair of saw horses or a table. You will need to remove the Canopy, so start off by releasing the Top ...

• Aurora - Changing The Wire on Aurora/Eclipse V2

  Changing the wire on an Aurora/Eclipse V2 For a copy of this manual, please print or download the Attachment. If you are working on an Eclipse, open the canopy of the umbrella with the roof removed by pushing up and locking the Slider Car Tilt Knob ...

• Eclipse V2 - How to Replace the Winder Unit (Video)

  How to Replace the Winder Unit on the Eclipse V2 (Video) This video demonstrates the winder unit repair to the Riviera V2, this is the NZ version of the Eclipse V2, they are the same umbrella with the same parts and workings.

• Eclipse V1/V2 & Aurora - Catching Hub Tube Alteration Guide

  Catching Hub Tube Alteration Guide Insert two washers over the bolts in-between the "Top Hub" #11 and the "Hub Tube" #9 at the circled points on one side only. If the tube still catches insert two more washers between the "Bottom Hub" #6 and "Tube ...