Shademaker - Sola & Liberty Cantilever Umbrella
Shademaker - Sola & Liberty Cantilever Umbrella
The Shademaker Sola & Liberty umbrellas have been discontinued for many years now. For
a while we were able to supply parts & accessories for them but unfortunately our stock of parts
& accessories has now run out and we are unable to get any more from the factory.
The equivalent/replacement models for the Shademaker range are as follows:
The good news is that the installation fitting you have installed (either base plate or
inground) is compatible with the new umbrellas so, you don't need to re-do the installation if you decide to purchase a replacement umbrella.
You can view and purchase these from our stockists:
Related Articles
Cafe series Umbrella - Spare Parts Diagram 3m SQ & 4.2m OCT
Cafe Spare Parts Diagram for 3m Square & 4.2 Octagonal When ordering spare parts, please use the allocated Part Number.How to set the Centre Post Inground Sleeve - Cap Lid Spring
How to set the Centre Post Inground Sleeve - Cap Lid Spring For a printable version, please download or print the attachment.Cleaning and Maintaining Your Outdoor Umbrella
Cafe series Umbrella - Repair Support Arms/strop
REPAIRING SUPPORT ARMS/STROP If your umbrella arm has lost its bolt and nut the following parts can be sourced to replace them.Cafe series Umbrella - Replace the Rope/Cord
Replacing the rope - CAFE SERIES umbrellas Steps to replace the rope : (1) Remove the umbrella canopy. Put tape around the umbrella arms so it doesn’t tend to open while performing the repair. See picture 1 below. Picture 1 (2) Unscrew the top half ...